Framing Process
Our conservation safe mounting process will allow you to frame your Collection.
|
|
|
Framing Process for Record Frames, CD Frames, and DVD Frames
1. Remove the back of the frame by bending up the "flex points" located around the mat on the back of the frame.
2. Remove the back and front mat pieces leaving the glass in the frame.
3. Mount your items by sliding them under the clear vinyl "tabs".
4. Gently lift the top mounting tab and place your item flat against the matting allowing the top tab to hold the item in place.
5. Additional items are mounted in the same fashion by sliding them behind the tabs.
6. Look at the mounted piece to be sure that the items are mounted "straight" and adjust as needed.
7. Place both mat pieces back into the frame and bend the "flex points" back into place to secure the glass and mat pieces into the frame.
Framing Process for Trading Card Frames, Comic Book Frames, Sports Program Frames, Magazine Frames, Postcard Frames, Playbill Frames, Sheet Music Frames, Little Golden Book Frames and T-shirt Frames
1. Remove the back of the frame by bending up the "flex points" located around the mat on the back of the frame.
2. Remove the back and front mat pieces leaving the glass in the frame.
3. Mount your items by sliding them into the pockets of the inner lining as shown in the picture.
4. Replace the pocketed lining and inspect the mounted piece to be sure that the items are arranged how you intended.
5. Place both mat pieces back into the frame and bend the "flex points" back into place to secure the glass and mat pieces into the frame.